Ranging from simple flat bar Pipe Clamps to Rubber & PTFE lined U-bolts with support plate, in both GRIP and NON-GRIP type.

Pipe Clamps

Pipe clamps are manufactured according to ship-building, the heavier offshore or customer specific standards, in Carbon Steel, Stainless/Alloy Steel or for GRE lines, with clamp lining to suit Temperature requirements. Clamps for pipe size ½" to 40" are made with 2, 3 or 4 bolt fixings.

Insulated U-Bolts

A complete range of plain & Rubber covered U-Bolts and Clamp Isolators suitable for mounting steel and cupronickel pipes are manufactured by Torgy to exacting engineering standards and using elastomers, which have been subject to extensive testing.

Lining Materials used have an excellent resistance to spread of flame and low evolution of toxic gases, they are resistant to ozone and a wide range of chemicals and solvents.

The Pipe Guide range firmly holds the pipe but permits small rotary and longitudinal movements caused by expansion of the pipe whilst damping vibration.

The Pipe Grip range firmly holds the pipe to prevent movement, whilst damping vibration.

All Insulated U-bolts the following benefits:

Ø Reduction of transmitted noise levels, vibration and shock loadings.

Ø Prevention of abrasive fretting between pipes and clips.

Ø Electrical Isolation between pipe work and pipe clips.

Ø Prevention of electrolytic corrosive action between dissimilar metals.

Reduction of pipe strain through clip misalignment.