Torgy Group
Trunnions
Home PageNewsProject ReferencesQuality, Environmental, H&SEnquiry FormContact us
Newsletter Subscribe

Type IBL : Base supports for cold lines

Cold Shoes 10

Trunions Table 1

Block and plate dimensions can be varied as required.

NOTES:

  • Unless otherwise stated, all dimensions are in millimetres.

  • Insulating blocks are constructed from ASE plas1010 SWA material.

  • The block material has a temperature range -196°C to +160°C continuous and the supports have an effective ‘K’ value of less than 0.5 W/m°C.

  • The standard range loads are quoted at 25°C and should be derated linearly with temperature to 50% at +160°C.

  • No reduction in strength occurs below +25°C.

  • Safe working load vertical refers to a downward load only, for a vertically upward load please consult Atlantic Supports Engineering.

  • Base plate to be carbon steel BSEN 10025:1993/S275. The dimensions and material of the base plate can be varied to specific customer requirements.

  • Top plate to be low temperature carbon steel or 304 stainless steel to match specification of the pipe or to specific customer requirements.

  • Blocks must be supported over at least 30% of the base.

    • Base support applications

    Trunions 1

    Base supports fixing methods

    Trunions 2